The Anker Prime Smart Display Charge (160W) and Anker Nano Smart Display Charger (100W) which were just shown at CES in January have been officially launched in Malaysia today. Both offer high-power charging, multi-USB support and a compact size.
The Anker Prime Smart Display Charger (160W) (A2687) is equipped with three USB-C charging ports
with an output of 160W. Each port can charge at a maximum power of 140W. When three devices are charged, the ports offer 70W+70W+20W power. Its small size and only weighs 220 grams makes it smaller and more compact than other chargers on the market.
There is a screen on the top of the charger that displays information about which port is being used, the charging power being performed, the temperature and accessing settings that give importance to a particular port. The charger has Bluetooth support allowing it to be controlled from a phone using the Anker app.
The Anker Nano Smart Display Charger (100W) (A121B) is equipped with 2x USB-C and 1xUSB-A ports with a power output of 100W. When all three chargers are used, the power distribution is 80W+12W+7.5W. Each USB-C port can charge at a power of up to 100W while USB-A is up to 33W. The screen on the side of the charger can display graphics of port usage, charging power and temperature. This model does not support the Anker app.
The Anker Prime Smart Display Charger (160W) (A2687) is sold at RM 489 while the
Anker Nano Smart Display Charger (100W) (A121B) is RM 229 starting tomorrow.
